1. Le nouveau Multi Grabber/Dispatcher SFP sur port PCIe x4 ...

    Le nouveau Multi Grabber/Dispatcher SFP sur port PCIe x4 ...

    La carte entrée/sortie SFP PCIe4 est compatible avec le format PCIe Gen1 x4. Elle est donc tout à fait adaptée à un environnement Linux ou Windows.-4x 3G SDI
    Entrée/Sortie
    -4 Entrées et/ou Sorties format SFP
    -Frame Grabber SDI x4
    -Dispatcher SDI x4
    -Gbit ethernet link x4
    -telecommunication network monitoring and smart switch applications
    -4x 3.125Gb/s Input/Output high speed optical links

    -high speed data transfers
    -CPRI digital radio data interface compliant
    -medical image processing
    -security & surveillance imaging
    -Detection & recognition processing
    -high speed field busses
    -Mixed output or input proprietary applications
    -Stand alone application (optional external power supply)


    -PCIe Gen 1 x4 Port
    -Dual ECP3 FPGA Board
    -3x 2Gb DDR3
    -4x input and 4x output 3.125 GHz SFP links
    -1x 1080p single link HDMI output

    La carte entrée/sortie SFP PCIe4 est compatible avec le format PCIe Gen1 x4. Elle est donc tout à fait adaptée à un environnement Linux ou Windows.
    Le temps de boot de l'ECP3-17 est garantie à moins de 100ms grâce à l'utilisation d'un XO2 dédié au chargement rapide.
    4 Entrées/Sorties SerDes de l'ECP3-70/95/150 sont routées vers les 4 cages SFP et 4 autres vers la sorties HDMI 1080p.
    Chaques cage SFP peut recevoir une large gamme de modules différents:



    -3G SDI I/O module
    -Single link HDMI output module
    -High speed optical I/O module
    -Gigabit Ethernet or 10/100 Ethernet module




    Caractéristiques


    - Lattice ECP3-70/95/150 for processing and external IOs shaping. This FPGA is associated to 2x 2Gb DDR3 memories
    -4x PCI Express Gen1 connector interfaced by an ECP3-17 with 2Gb DDR3 memory
    -High speed XO2 based parallel boot architecture
    -4x SFP ports
    -1x 1080p single link HDMI output
    -STM32 ARM micro controller
    -64+16 bits inter-FPGA bus
    -1x USB Full Speed Device port
    -1 Kb EEPROM, 12 bit temperature sensor, 64 bit unique serial number
    -Power management
    -External optional power for stand alone application
    -I2C communication link for the 2x FPGA and the STM32
    -Several UART for debug or low BW exchange
    -External SPI port
    -Size 167,5 x 111mm PCI Express Short Card form factor compatible


    Data Sheet