- 4x 3G SDI input-output
- 4 input and/or output SFP format
- SDI Frame Grabber x4
- SDI Dispatcher x4
- Gbit ethernet link x4
- Telecommunication network monitoring and smart switch applications
- 4x 3.125Gb/s Input/Output high speed optical links
-high speed data transfers
-CPRI digital radio data interface compliant
-medical image processing
-security & surveillance imaging
-Detection & recognition processing
-high speed field busses
-Mixed input or output proprietary applications
-Stand alone application (optional external power supply)
-PCIe Gen 1 x4 Port
-Dual ECP3 FPGA Board
-3x 2Gb DDR3
-4x input and 4x output 3.125 GHz SFP links
-1x 1080p single link HDMI output
The input-output PCIE4 SFP card is compatible with PCIe Gen1 x4 format. It is completely adapted to a Linux or Windows environment.
The boot time of the ECP3-17 is guaranteed to be under 100ms via the use of an XO2, dedicated to the fast load.
4 Entrance / exit SerDes of the ECP3-70 / 95 / 150 is routed towards 4 SFP cages and 4 other towards the HDMI 1080p output.
Every SFP cage can receive a wide range of different modules:
-3G SDI I/O module
-Single link HDMI output module
-High speed optical I/O module
-Gigabit Ethernet or 10/100 Ethernet module
Specifications
- Lattice ECP3-70/95/150 for processing and external IOs shaping. This FPGA is associated to 2x 2Gb DDR3 memories
-4x PCI Express Gen1 connector interfaced to an ECP3-17 with 2Gb DDR3 memory
-High speed XO2 based parallel boot architecture
-4x SFP ports
-1x 1080p single link HDMI output
-STM32 ARM micro controller
-64+16 bits inter-FPGA bus
-1x USB Full Speed Device port
-1 Kb EEPROM, 12 bit temperature sensor, 64 bit unique serial number
-Power management
-External optional power for stand alone application
-I2C communication link for the 2x FPGA and the STM32
-Several UARTs for debug or low BW exchanges
-External SPI port
-Size 167,5 x 111mm PCI Express Short Card form factor compatible